Відео

How long are your safety straps ( what length did you get ) ? Multi grip bar, can that be mounted upside down? my ceiling is 2400 mm, so not sure I'll be able to use it mounted upwards

Mannie G! Nice video. I review a lot of CadyyTek carts on my channel and have not used a Bag Boy or Clicgear yet! Looking to get one of the two soon. Nice video!

Does the quad not have a bottom strap for your bag?

As someone who owns a clicgear, some if these notes are true but most are exaggerated. It's a great cart. The Clicgear is waaaaaay more customizable and feels better to push but it's is a bit harder to set up and tear down. Both carts spill your drinks over bumps, the difference is the bagboy spills your drink all over your stuff while the clicgear spills on the ground. You can get a click on side bags to store quick access items which solves the storage for $25 and the umbrella holder for clicgear is way better than bagboy. There isn't a wrong choice here honestly. They both have pros and cons.

The clique gear cracks where the hook for the handle. 3x Mine cracked

I wish this review existed with the sun mountain speed cart v1r included!

Super helpful video!

Great review , thanks mate

Maybe you should have learned to fold the Clicgear properly before doing the vid?!

Ok so iam finally decided to buy a rogue rm3 2.0 to drop in my rhino:) I have many titan 5/8" attachments on my x-3 titan wall rack. I am dropping in my rhino into a monster rogue rm-3 monster rack 2.0 and was wondering if I is a good idea to buy the 5/8" to 1" adapters to use them on the rogue rack if tbey fit??? or will it be better to buy rogue attachments instead of adapters??? Just trying to save some money. The titan attachments fit my rhino uprights. The short rhino uprights are the same as the rm-3 monster 2.0 uprights correct??? Been thinking about the monster lite too to drop innrhino

Great Video! You earned a sub!

How u doing bro. Hey do u know if the titan attachments 5/8 will fit rogue RML-3 rack, i think they do but but 100% sure. Iam thinkimg about buying a RML-3 rack to drop in my standalone rhino. I already have lots of titan x3, 5/8" attachments.

I watched your videos and you never did tell us how much you picked them up for… only that the 2.0 can with the rack bundle… total cliffhanger on the ab-3 my man 😄

Breaking down that clickgear is a complete mess. Absolute non starter.

Wow. You need a lesson in clic gear physics. I can open one in a third of the time and with a 100% less fuss. You made that look so painful I wondered if it was intensional.

it looks like if you push your hips back you don't have a vertical cable anymore, looks like its pulling you at an angle. Some people had mentioned to me that it puts knee sheering no matter where you stand:( I have a bad knee and this is what's preventing me from getting rhino and the loading on vertical pin is preventing me from getting squat max. I guess nothing its perfect. lol. don't know which one to get yet

Please read the manual for Clicgear before you complain… 😮

Good review, thanks! I only wish you had left all three collapsed to compare storage size.

Bad Sound

I love my bench AB-3. Take it easy...buy a rogue socks put rice inside and then put in the gap....😉

Where did you get the platform flooring?

Thanks a lot man! I was looking for this exact comparison as I’m looking to buy one of these two. Still gotta think about it but you gave me what I need for a thoughtful consideration. Thank you!

I have been looking at racks for 48 hours and yours is the best one yet! Thank you so much for taking the time to provide a detailed explanation/demonstration of this rack.

Are you kidding me?!? The procedure for setting up a Clicgear isn't nearly as difficult as the reviewer is portraying - he should read the manual. LOL

Great video. Where did you buy your floor mats?

My problem is stability over time for the nitron. It seemed flimsy in the store

yea I was thinking about getting the rhino belt squat plus rack..the rack it's 24" but it looks like there is only about 4-5 inches of space from the front uprights ato the rhino platform on floor..i don't see how I can do incline, decline using a bench outside of rack? Right now I have a prx wall rack and when I do decline and incline bench I have to move the bench back about 13 inches so I can bench..I don't think I will be able to bench outside this rack with rhino built in to it:( I emailed rogue and they said that not even the 30" rack will work with a bench outside since it only has about 6-9 inches of space in the front:( so I don't know what they ment by me been able to lift outside of rack without a bench. Lol.. Iam I supoused to bench, incline, decline standing up without bench. Lol I don't know what's the purpose of them selling it with rack if I can't really use rack not even outside of it?

Very helpful - thanks.

Just sold my 2.0 after moving into a smaller home gym. Is the AB-3 much lighter and easier to move around than the 2.0? I didn't have the spotter stand installed and it was just so hard to lift and roll. I'm hoping the AB-3 is easier to get out of the way if I need my rack (Monster Lite 390) for squats etc.

You should do a gym tour update. Great gym so it'd be cool to see what changes you made & why.

3/12/2020. That's some timing. And the garage sale deal!

Learn how to set up and pack up the click gear properly before reviewing if you want to be taken seriously. It's nowhere near as hard as you made it out to be.

Great video and setup! What make/model are the rubber grip plates? I’d really like to get some for my home gym.

Classic case…when dudes have too much money and not enough brains

Thanks for going over the small quality of life details (cup holder, accessory bag placement). Push carts all function similar but it's these small differences that make owning one over the other that much better!

Do you prefer the grey name plate over the Satin clear ? Beautiful rack

Helpful video. My stand bag just broke and I'm considering a push cart for the first time. Can you give an update on how you've liked the Bag Boy Nitron the last couple years? Any issues come up during that time? Thanks.

Super love those rubber grip plates. I got huge hands I'm getting those. I seriously need them

Great to see a walk through like this. Definetly getting the clear coat. I would love the stainless but Rogue Europe don't do it.

Thanks for making this video, exactly what I was looking for

I'm all about the pull-ups. How is it for that? Thinking of buying today.

Got the Back Widow from Flex Wheeler-nice man

I’m sure all are great, but as a high school coach the clicgear has been great. 8 carts and haven’t had to replace or adjust anything on the carts for 5 years

Have you tried to sit facing the other direction to avoid the gap on your back?

This rack is everything I’m trying to develop myself! The clear satin has changed my mind on color choice! My only question to you is what depth is required from the front of the rack to the back with plates mounted to the Rhino (55lb large)? I found details from Rogue but not the amount of space required for plate mounting to the rhino. I can’t seem to find this anywhere. The area I’m renovating now is limited and I’d like to make sure we have the room. Thanks for all your help with this! 👍🏼

hey your on camera communication skills are very good keep it up

That gap though. Zero gap bench for me.

Thank you! Intelligent and thoughtful review with great camera work and everything. You’d be amazed at how many freaking idiots I’ve had to wade through to find your channel when looking for reviews of this rack 🤦🏼‍♂️ Thank you!

I’ve been shopping for a rack for the last few weeks. I’m considering this rack, simply because it is a flatfoot rack and does not have to be bolted to the floor. I like it as there are several accessories that can be added to the rack. I’m mainly interested in pull ups with this and after contacting Rogue, they advised obviously no kipping pull ups as it’s not that stable even for a Rogue rack. I also had considered getting the Rogue Monster Crown pull up bar to add to the front and Rogue also told me it wouldn’t do go on the front. Anyway, it still looks like a nice rack. Have you sold it yet?